Kundeanmeldelser for VEVOR Pipe Tube Bender, 3/8" til 1" OD Manuell Pipe Tube Bender med 7 bøyedyser, 180° kobber aluminiumsrør bøyeverktøy for HVAC Air Conditioning Kjøleskap bilreparasjon

Machine basique qui fait le boulot,on pourrait juste regretter d’avoir à polir la matrice pour les tubes cuivre sinon ça va.Ne regrette pas l’achat.

Preis Leistung gut!!

Grundsätzlich funktioniert das Biegegerät gut. Die Passgenauigkeit der Komponenten könnte allerdings besser sein, dann müsste man nicht soviel ausgleichen. Die Bedienungsanleitung ist allerdings nur in englisch und so klein und unübersichtlich in den Skizzen, dass man es kaum erkennen kann. Da besteht deutlicher Bedarf an Nachbesserung. Ansonsten lässt es sich damit gut und kraftvoll biegen.

If there was manual/instruction for use I would give it a 5

This looked great on a deal, but when I got it I realized that it has to be bolted down really well. As a result, I have nowhere to put it. This is 100% my fault, but if you are going to buy this, realize you need a very stable platform for it to be able to use effectively.

Works well. For the larger sizes it may pay set it up on a vertical surface. So pulling down using body weight makes it easier. It is NOT a pipe bender. Thin wall ERW works well. 16 to 19 mm dia is the sweet spot. Used for making carry racks on my motorcycle.

Buen producto, precio adecuado a su desempeño, sin problema, justo lo anunciado y requerido, su operacion es correcta

Works well dose everything I need it to do I would how ever recommend getting the stand or bolting it down to a very sturdy base or stand

About this tool and built a stand for it. Bent some tubing on it and everything seems to work fine. The only thing I changed was I used the larger tube retainer on the smaller diameter pipe so I could easily remove it if I have a bend in the middle of something. The pipe retainers tend to leave a little dimple in the metal but you can slip a piece of wood or leather in between the pipe and the retainer ring you're using the larger one and avoid dimpling the metal. You could also fabricate a slightly better tube retainer if you are so inclined.

Vähän karkeat lestit jää aluputkeen jälki. Mutta muuten ihan hyvä. Pitää vielä opetella käyttämään. Kunnon ohjeet puuttui, mutta eipä tuossa monta liikkuvaa osaa ole. Aika näyttää miten kestää.