Kundeanmeldelser for VEVOR Pipe Tube Bender, 3/8" til 1" OD Manuell Pipe Tube Bender med 7 bøyedyser, 180° kobber aluminiumsrør bøyeverktøy for HVAC Air Conditioning Kjøleskap bilreparasjon

So far I haven't used it. Want to bend up some 3/4 thin wall tubing t build a mini bike frame. Trying to figuire out how to mount it to something thet won't move, such as a lolly column in my garage. One thing I did modify was the adjustment knob/roller, by knurling it so it's easier to turn. Helps much.

Item works great, does every thing I needed, have used it quite a few time already, needs a solid base to bolt it too then creates fantastic curves

It works, even with 25x1,5 mm stainless tube. ........................................................................................................

Reçu rapidement comme d'habitude, très costaud, pas essayée mais pas de raison que ça fasse pas le taf...

C'est pas du matériel professionnel, mais ça fait le travail pour un amateur. Ça plie du20/27 tranquillement Je valide largement

The first task on receiving this is to get it mounted. I had a bench grinder pedestal made with a bigger/thicker upright and bolted it to concrete with 8mm thread dynabolts. Then had to drill the top plate to fit - its not mounted squarely, but that's ok. Bent my first tube. All good. I am working my way up to 1” tube (at 7/8” now). You get a mark on the tube at the tube retainer. I have tried to put shim steel in to buffer the tube, it still marked, but not as deep. I have some 3mm leather to try, but will have to swap the retainer off the next size up die, and with 1” tube I wont have a next size. The only features I would like would be a carry case (i have seen other vendors with a case, but it doubles the price) and an angle pointer for repeatability when bending more tubes the same. My best suggestion is get extra tubing and practice before making your final parts.

Cintreuse de très bonne facture pour le prix . Réalisation sur mesure d'un crash-bar, d'un porte bagage moto, travail très facile.

Perfectly delivered and is a heavy quality product. For what I will need it for and have used it for it works 100 % You need to mount it on a surface to bend the bigger diameters and it works just like more expensive tools doing the same work.

As described. Solidly constructed and works very well on the 20mm steel tube I’m working with.. Would recommend this to anyone doing occasional tube bending but not wanting to spend thousands..

Seems to be very well made, sturdy and thick construction! With the legs on its about 50cm off the floor which is a bit low so they could have been a bit longer. Other than that it works great:)