Kundeanmeldelser for VEVOR poleringstrommel smykkepoleringsmaskin 3 kg, roterende tromle overflatepoleringsmaskin 60 W, smykkepolering roterende tromle justerbar tid og hastighet poleringsmaskin kulemølle, for gull, sølv etc.

Robust and good product, the main problem is the far too short timer ...60 minutes is far too quick...in conclusion I didn't enjoy constantly turning it on to get decent tumbling time.

Satisfait de mon achat livraison rapide, prix correct et fait le job. Toutefois et raison du 99%, les billes ne sont pas en inox et tachent le cuivre lors du nettoyage. Elles pourraient être remplacées et livrées avec par des pins inox.

This is the second of these that I purchased. I'm using them to tumble rocks in stage 1 even though this is designed for light weight cleaning tasks... coins, jewelry, etc... Still, it makes for a very inexpensive rock tumbler compared to machines built to tumble 12lbs of rocks. This has a decent DC powered motor, but the conversion circuitry (from AC / mains power to DC power for the motor), seems to be grossly inefficient..... which is where my title comes into play..... With a total barrel weight of 9.8lbs (empty barrel + rocks + water + grit) this pulls a LOT of power from the AC outlet, using about 4x the electricity of my 3lb tumbler overloaded to 4lbs. It cost me about $1.50 per day to run it from AC plug in. Upon noticing that it has a DC motor, I converted my first one to run directly off 12V battery - NOT RECOMMENDED unless you have professional training in AC and DC electrical systems. As soon as this one arrived, I also converted it to run on 12V battery with a voltage rheostat to control the RPM's. My battery will run one tumbler for about 228 hours, nearly 10 days, and then costs about $2 to recharge the battery to run another 9 days. Running both tumblers at the same time dropped me down to about 98 hours runtime. Unfortunately, I didn't think to plug this one in & test it out before converting it. It has a bad motor, which was only evident after turning on the auto-reverse feature after I had already converted it to run directly off battery. It runs fine forward, but when it reverses, it doesn't run well at all, to the point of coming to a complete stop two days after the conversion, then won't run forward or reverse... The motor is getting slightly warmer than the first unit I bought, at about 115F, the original one only gets to about 100F right next to it. So it's not due to overheating.... Seems like just a bad motor. I primarily got the second one for the new barrel anyway. After 12 months of almost continuous tumbling, the original barrel is starting to wear out. It still has quite a bit of life left in it, I would guess that it has at least a another 12 months of tumbling before it wears enough to be trashed. All-in-all, I would recommend this tumbler, just make sure you check it out pretty well as soon as possible.

Contant dans l'ensemble de mon achat pour le moment. 2 points à améliorer : Les perles fournies rouille Un moyen d'isolation dans le tumbler pour que cela fasse moins de bruits.

It works as it should. I had some issues with the motor at the beginning As it just suddenly stopped. I think an internal safety switch must have tripped as it suddenly started working again the next day. Only down side is the clear plastic is pointless as it soon scratches up and you can't see anything

it works perfect. very nice process. but after process the casing and steel balls are wet and getting rusty totally. ne any apparatus to dry them

The machine feels solid and works well. The only gripe is that the lowest speed is almost to high. The higher speeds are less than useful for jewelry polishing. The supplied polishing balls were NOT stainless. This made them useless, since they rusted and fouled the water. You can use a magnet to test if polishing balls are stainless. Stainless steel has very little or no magnetic properties.

Il prodotto è giunto a destinazione opportunamente imballato. Deve essere provato e poi darò una valutazione definitiva.

Great machine so far. No problems and i am enjoying using it. If the beads were better quality i would of given it 5 stars.

Very noisy. 1st speed is still too fast. Tends to run off the drive wheels. Must use water to keep a balance. Still runs off the drive wheels. Steel balls are a pain to remove from the drum without a magnet.