Kundeanmeldelser for VEVOR Svømmebassengtrekk Sikkerhetstrekk for basseng 4,9x9,8 m / 16x32FT Rektangulært, nedgravd sikkerhetstrekk for basseng Grønt netting, solid sikkerhetstrekk for basseng, vintersikkerhetstrekk

correspond à ce que je souhaitais. semble de bonne qualité, forte de ses sangles cousues. Seul regret c'est que l'on ne soit pas capable de faire ce produit en France (Chine).

Selected a winter pool cover for my house in Greece, and had the item shipped to the destination. Unfortunately, it was slightly too small (my fault), so I had to contact customer services to resolve the problem. Over the course of 3 - 4 prompt e-mail responses, the whole issue was sorted out to my complete satisfaction. The people involved were courteous, professional, and most helpful. I can't recommend their help and support highly enough. Many thanks, adrian

Today I installed the cover over the pool and found a small production fault ( see 2 photos attached).

I dont know who needs to know this but the actual measurement is 18x42, and yes I bought the 16x40, so I would assume that the other sizes are sized accordingly. Some of the sizes have the size of the pool, then the size of cover you should buy for it. This one did not, so I was a bit worried that it wouldnt be big enough. Really needed the one with stairs extension but for the price and coverage i'm not going to worry about it! Wish it came with some kind of excess strap keeper, I may just use zip ties. Already have 11 leaves that didnt go in the pool! I really took my time and made sure my layout was square with the pool, and it payed off I think it looks great, the anchors seem to be of reasonable quality. FYI the drill bit size is 3/4 for your masonry bit if going into concrete like I did.

First, the picture is deceiving; the stair section is actually where it’s supposed to be; in the middle. I missed the fact that no ground stakes are included; I do not have a concrete deck around my pool, but the supplied fasteners appear to be of decent quality. Otherwise, the spring clips and straps are exactly the same as the original cover, and they work with my ground stakes. Although the cover seems just a bit thinner, it is also a finer mesh and rain water seems to pool up faster; seep in more slowly. I have large inner tubes under the cover to prevent “water-logged sinking” - probably not a concern for those with the tighter, concrete anchored fastners. I was surprised to discover there is no storage bag, but the old one will work. One of the plastic strips on the underside, protection for cover to pool coping contact, was not completely stitched, but it seems ok. We’ll see how the cover survives a Vermont winter and re-asses in the spring.

Just the perfect product which arrived right when we needed it and for a fair price compared to other vendors.

Been wanting a safety cover for years, conned my husband into doing one. After reading directions, watching several videos and borrowing a hammer drill with 3/4 bit, we started. Placing the cover where we needed, because it was not custom fit, was tricky. Decided to place ropes running from end to end and side to side, connected to fence posts, then laid cover on top, which held it up from the water and we could maneuver the cover in place. Drill worked great and had it done in no time. Our only problem was we were missing one anchor bolt and it took 3-4 weeks, came from China, to arrived. Company made it right and gave us a slight refund, which was generous. Time will tell how it holds up under upstate New York winter!🤞

Volevo restituire i prodotto perchè avevo sbagliato la valutazione per la copertura della piscina, pensavo fosse più facile l'istallazione, ma non si poteva restituire gratuitamente se non ad un costo esagerato, mi hanno fatto uno sconto e l'ho tenuto senza poterlo usare .

Delivery time is far too long.

Sturdy fabric and nice anchoring hardware. The hardware was easy to install into a concrete floor covered with ceramic tiles. It would be helpful to define the distance of the mounting anchors from the cover edge to maintain optimal tension. It would be nice to have an option to buy the support poles.