Kundeanmeldelser for VEVOR gjæringsmål, standard spor 19 x 10 mm, saganlegg av aluminiumslegering med 46 cm rutenett, 15 vinkelstopp, stempel og avtakbar skive, for trebearbeiding

It wouldn't fit in my miter slot. I checked the slot with calipers and it's perfect. I checked the miter and it varies from front to back. It's an easy fix but for the price, it shouldn't be necessary.

I bought the vevor mitre gauge based on reviews I saw on utube. The price was good and it looked perfect as an upgrade for me. I break stick down on my table saw and all the reviews showed the mitre gauge with an extendable base. You can guess my dissaponting when it arrived with no extendable base. The illustrations of the gauge all show the flip stop obscuring the end of the gauge so covering up the view of any extension I wonder if this is deliberate. The fence as delivered dies the jib but nothing more.

the size and weight of the unit becomes a problem with smaller table saws like dewalt, the T-slot rail is not stable enough to hold the unit and only locks (with coin) in the front creating a lot of play at the end of cuts. I will likely build a infeed and outfeed support to hold it more steady

It fit my saw but i want It on the right side of the blade and I cant flip It around so the measument is matching so for me this is not turned out as a great buy, its been stored under the table ever since buying 😑

Produit correct. Malheureusement, le descriptif donné sur le site VEVOR est très succinct et ne permet pas de savoir avec certitude si le produit s'adapte dans la rainure de ma table de machine. Les caractéristiques dimensionnelles ne sont pas détaillées. Pour ne pas renvoyer le produit, j'ai du bidouiller 1/2 journée pour faire une adaptation à ma machine !

Good product but has some small issues. Not square out of the box. VEVOR won’t match pricing or even price adjust on their own products. Waited two weeks for my package. When I contacted customer service they could not tell me where my package was in the process. All they could say it was shipped. All around customer service needs improvements. Thanks

The miter gauge by itself is acceptable. The problems are with the fence. The fence face is not smooth. There is a ridge at the lower portion of the fence causing the front portion of thinner materials to rise up off the table saw surface when held tightly to the fence face. If all you were cutting was 2x4s you would be fine but my needs are for thinner stock. The other issue is with the ruler scale on the fence. Since there is no way to adjust/compensate for the distance between the fence edge and the blade you will always have to do the mental math of adding that distance on to the desired measurement. This issue makes the ruler unusable/not easy to use. For these reasons I believe this tool will sit in my shop collecting sawdust. I would like to return this item but after investigating the return policy I discovered that I would be charged a restocking fee and have to pay return shipping. This is never mentioned until you attempt to return an item. So the 30 day moneyback guarantee has strings attached. I wont be buying anymore items from Vevor.

I did not receive this order. I received a message that it was damaged in shipping and returned to shipper. The tracking shows that it was returned to shipper.

Pushing a longer board it is way too easy to override the spring pressure of the balls and springs, that keep it t tensioned in the slot. It's hard not to deflect a couple of degrees as you push it. Basically if you need the fence your board is too long for this miter gauge, you will deflect the angle and get an inaccurate cut. When I first set it up using a five cut method on a 12" piece of plywood. It wound up at an almost perfect .oo2" on the last cut, right out of the box. As soon as I cut a 6" board 30" long, the cut was about . 020 out of square. Huge waste of money! Find a better miter gauge that doesn't use springs. This might work if you were only cutting short pieces for a segmented ring. Other than that it's junk for standard use. P.S. The problem was not my saw top. It shined up, smooth and very slick. I even made a conscious effort to try and keep it from twisting by trying to counteract the twist as it made the cut. It helps but it's impossible to do repeatedly. Please find one that does not use springs for tension.

Never received item. Vevor camcelled order waiting on refund.