Kundeanmeldelser for VEVOR spraymalingstrykkbeholder, 2 l/0,5 gal lett lufttrykkbeholder for maling, 1,8 mm dyse spraymalingspistol 3 m slanger for hjemmedekorasjon arkitektur konstruksjon bilmaling, maks. 45 PSI

Es la tercera que compro. Muy bien, ideal para tirar cola de contacto para fabrica de colchones

I needed a bigger pressure pot for resin casting. This came fully assembled. I only needed to remove two pipes from the inside to make it a pressure pot instead of a paint pot. Same quality as the other name brand.

Ik gebruik enkel de drukketel om om lijm op druk te kunnen brengen. Werkt goed. Drukregelaar een beetje fragiel.

Really nice. The only thing is that maybe the metal tube that goes to the bottom of the tank should be longer or bent so you get all the paint in the tank out.

Le colis est arrivé endommager et a été ouvert puis refermer (peut être par les douanes!? ) et du coup il manquais la fiole de réparation de fuite a l'intérieur du paquet, pour l'instant il ne semble pas fuir donc ce n'est pas un gros problème. La qualité de l'ensemble est très bonne et pour 110€ ne nécessite pas de faire de modifications pour les coulées de résine donc vraiment très intéressant car le rapport qualité/prix/sans modifications est introuvable ailleurs!

I bought this to use as a pressure pot for resin casting. It works well for what I wanted it for. The sealing isn't the best, but it does what I need it to do. Haven't used the spray guns, so I can't comment on them.

I bought the pressure pot purely for my hobby of epoxy and wood turning. However the paint pick up tube was in the way of putting items in the pot and it required that I remove it, would have been nice to just be able to unscrew it and get it out of the way. The pot initially leaked air at a couple of fittings but I was able to remedy that. Overall I am pleased with the pot and have now used it several times since receiving it. Delivery was prompt and I would recommend the item to others.

Received on time assembled and was very impressed I plan on purchasing a bigger one for my business and would recommend this product to any one that wants precision and ease.

Unless you have previous experience with a sprayer like this, you will likely be lost. The instructions are not only chaotic, but also incomplete. Important adjustment controls are missing in the picture diagram. The supply lines are highly inflexible, which causes frequent entanglement and affects proper spraying. However, with some trial and error and careful manipulation, you can obtain an acceptable outcome.

Good pressure pot, that's mostly easy to use. The biggest issue is that you have to remove the outlet/pickup pipe inside to make it easier to use for casting. It's also crap that they stole images from others to put into the (printed) manual, clearly poor ethics and morals!