Kundeanmeldelser for VEVOR Pro MIG-sveisemaskin, 200 Amp Pluse MIG-sveisemaskin, 5-i-1-sveisemaskin MIG Pluse/gass-MIG/flukskjerne-MIG/elektrode/løft-TIG med IGBT-inverterteknologi og LCD-skjerm

This thing welds great. Wish it had suggestions for metal thickness. Other than that awsome.

Hi friends, i chose this machine because its the cheapest welder that lets you easily switch polarity, i use it with stainless steel fluxcored wire for performance car exhausts and it works well but the ground clamp let me down during a clients job wich was not fun so make sure to replace it before taking jobs and also make sure to not overtighten the spool of wire, you do not want the spring fully compressed or it can burnback.

Σχετικά καλό προϊόν , για οικιακή χρήση, η τιμή πολύ καλή, ποιότητα συμπαθητική, αλά η εταιρία μεταφοράς η UPS για την χώρα μου ΑΠΑΡΆΔΕΚΤΗ

Das Schweißgerät funktionier im Puls Modus sehr gut und zuverlässig. Auch der Programmspeicher funktioniert gut. Mit einem kleinen Zettel an der Seite des Gerätes kann man gut damit arbeiten. Leider hat der Standard-Mig-Mag Prozess keine Synergie, so dass man Strom und Spannung manuell einstellen muss. Dies funktioniert aber gut und wenn man sich die Einstellungen einmal abgespeichert hat ist das auch kein problem. Leider ist in der Anleitung vieles nicht beschrieben: - Abspeichern der Programme - Zurücksetzen des Gerätes auf die Werkseinstellungen Dafür gibt es aber einige YouTube Videos die sich dem ganzen widmen.

Hyvä toimiva laite !

Works great. Highly recommend for the price. Used it to wield 3/8 plate with great performance. It's a must buy fir a home owner

Very good welder with nice features. Pros: easy to use, it has a feature to store and load voltage and amp configurations (once I find a good configuration for a specific job I can store it (several banks are available) and then I can recall that configuration .ligh and handy. Cons. The pots are not very precise . It came with some electrodes for mig (0.8x2 and 1.0x2) but no outer cones nor specific cones for flux core wire (we can use the supplied gas cone but we have to clean it all the time.cables are short. We can buy those spares looking for mb15 mig torch reference.

Liten smidigt svets för det lilla garaget. Lättanvänd, Ingen super kvalitet men den gör sitt jobb. Så klart godkänd. 👍👍👍👍👍 av fem.

Ok, first things first if you use the extension adapter they provide with this you rish a chance of starting a fire. It goes from a NEMA 6-50P to a NEMA 5-15R that’s a no no in the electricity world. So cut the end off the welders power input cord and wire it up with a NEMA 6-50P then you will get full and proper power to the welder to maximize its output capabilities. welder seems to run good. Haven’t had much chance to weld with it.

Machine runs well it’s all in mm size so you will need to convert it. All setting in the book are a good starting point. Only complaint is the leads are very short but what does a person expect for the money. Over all great machine.