Kundeanmeldelser for VEVOR Pro MIG-sveisemaskin, 200 Amp Pluse MIG-sveisemaskin, 5-i-1-sveisemaskin MIG Pluse/gass-MIG/flukskjerne-MIG/elektrode/løft-TIG med IGBT-inverterteknologi og LCD-skjerm

Buenas ,tengo un problema con la maquina de soldar el hilo sale muy rapido teniendo el regulador al minimo por lo que no hace un cordón de soldadura lineal sino que suelda haciendo puntos ...

I had such high hopes for this welder. I looked at it for weeks & weeks finally the day cam that I was able to buy it. I have used it on 3 or 4 small projects and I have never been so overwhelmed with disappointment. It has no power there is nothing wrong with my electric im running it through 220volts on a dedicated 30 amp breaker it just isn't anygood. I had a smaller on 130amp from som other company and that welder was stolen but it was twice the welder this one turned out to be. Im heart broken.

Did not come with wire

Witam Spawarka przyszła w ekspresowym tępie i jest to duży plus dla VEVOR . Testowałem ją z orginalnym drutem osłonowym + dokupiłem Co2 do spawanie MAG . Spawając dłuższą chwile rurki ze ścianką 0.2 mm spaw jest przetiopiony , ale spawarka strzela i spawy nie dokońca mi odpowiadają . Zmiana drutu na 0.8 bezosłonowej jest zbędna ponieważ spawarka jest za słaba i nie przetopi drutu . Spawanie gazem Co2 jest możliwe tylko drutem 0.6 z gazem Co2

This machine is terrible. If you get 15 minutes of use before it flashes and burns the wire back, your lucky. It came with loos hardware, difficult to trouble shoot when you expect it to work right out of the box. The algorithm that sets to auto mode is too cold (and slow). When the welder flashes to start, It jumps the voltage to high to (start the arc) and it melts the wire back and jams the gun. When the gun jams, the feed mechanism forces the wire through the rollers and bends it. If you set the roller tension too light (to try to avoid this), it doesn't push wire into the weld puddle well. I'm a seasoned welder and this has to be the worst machine I've ever used. I've waisted so much time trying to make it work. Don't buy this thing until they make significant improvements. Even in the video, it shows a cold clumpy weld. It was a waist of money.

Nie niesom spokojny.zvaracka je dobra ano to musim uznať.ale drat ktory bol v zvaracke nieje vhodny do tej zvaracky.takze som si musel kupit novy drat ktoty ma vysiel skoro na 39 z postovnym.inac vsetko super.

Saldatrice per obbistica

Welder do not provide the possibilty to adjust wire feed speed. Welder have a programed soft start feature for the wire speed and you can't remove it. Gas hose is cheap and do not come with a regulator so dont think about gas welding straight out the box. Do not think it's a great welder for over 1/16 thick material. The overall welder quality seem ok. Instruction that came with the welder are the basics and cover the minimal.

It was ordered as a gift and took way longer to get than expected delivery date when it was ordered. Also never had any welding wire in the box. Seems to be a okay quality for small jobs but it doesn’t have the same amount of power as other 200a welders I have used. Overall it was not a good experience purchasing this product. I wouldn’t recommend

Took forever to dial in a setting (gas mig 220v) Once I thought I had it, would lay a few nice beads, then junk. Super inconsistent and untrustworthy on both manual and the synergy thing. I contacted vevor and although they tried, they were no help hence why I think this was internal issue. They gave me a partial refund. But I wanted to ship this unit back for a full refund, makes me think they know it has issues.. Would not recommend. I got their 270a mig 220 with dials and that thing is much better.