Kundeanmeldelser for VEVOR Magnetisk Drill 1300W 2922lbf/13000N Portable Mag Drill Press 810RPM

Drill in the slider seems slightly loose. when I put a 1/2" bit in it the bit was longer than the range to go up, so I had to clamp 1" tubing to my piece then mag lock it in place and drill for a bit, before putting it on the main drilling metal. Otherwise, I was drilling a piece of a fork lift fork, which was about 2" thick!!!, and it worked amazing. New bit, Oil and turn down to 1/4 speed and it was impressive. wish it had a way to hold the drill all the way up, it slides down all the way when not holding the handle.

I bought the cheap kit, and thus got the unit with a Jacobs chuck. The chuck is quite rough with pretty bad runout, so if you have an option, skip it. The rest of the unit is solid and heavy. I like the speed control. I think it should be wired such that the magnetic base should be energized before the drill can be used, so be careful. I used it to drill a hole in a cast iron porcelain clad sink, and it did a great job using ng a diamond hole saw. I haven't tried the cooling system but it's good to have. The magnetic base couldn't grip the porcelain but it worked out. The speed control is smooth and useful. Good buy, well made, capable.

Great Drill - only reason I gave it at 4 star is that the first drill I received was damaged and missing parts. You guys really need to work on your packaging. But other then that Vevor got another drill to me quickly and I'm very happy with it.

I bought the drill to smash a bunch of 25mm holes through 20mm of steel. This in conjunction with the angular cutter set were perfect, the magnet was strong and the motor had no issues keeping up. Worked straight out of the box, no adjustments necessary. Haven't tried it upside down or anything, but comes with straps for that. Definitely recommend the drill for the price given it can cut up to 50+mm holes.

It's awesome it's just heavy !

Goed niets op of aan temerken

Hält was es verspricht. Kabel von Steuerung zum Motor könnte besser sein. Hat bereits einen Wackelkontakt.

The electromagnet is a little underpowered so it has a tendency to let go when pushing hard on the drill bit, probably fine on smaller bits through. No safety switch to shut the drill off when this happens so be aware of that, not a deal-breaker, just need to be careful. My drill arrived damaged from shipment but vevor have sorted out replacement parts for the damage so no big deal, but better packaging probably would have prevented this. Overall not a bad buy for what you pay.

Alles bestens, Danke und schöne Weihnachten euch allen.

Bohrmaschine ok, Drehzahlverstellung nur bedingt, Magnet hält sehr gut, ingesamt eine gute Investitation!