Kundeanmeldelser for VEVOR Ratchet Pipe Threader Kit, 1/4" NPT - 1-1/4" NPT Manuell Ratcheting Pipe Threader, bærbart verktøysett for gjenging av rør med 6 STK NPT Dies, oppbevaringsboks for galvanisert aluminium jern kobberrør

Works well for what was paid for it

Generell tut es das was es soll, jedoch ist die Arretierung der Einsätze nicht stark genug, so das der Hebel immer wieder rausfällt. Würde sie dennoch wieder kaufen da ich sie nicht oft benötige

For manual threading and for the price I would both suggest to a friend and purchase again. The Chuck handle could fit tighter around tread nodule. Other than that so far they have worked real well

I ordered to thread some 1/2" and 1" black steel pipe. The 1" die gripped the pipe easily and threaded without issue (definitely needed some muscle as you neared the end of the threading). The 1/2" die did not stay in the ratchet very well (fell out many times while using) and required a lot of pressure applied toward the pipe to have it grip. The first two pipe ends stripped easily and needed to be trimmed 1/8" to restart.

Very easy to use pipe threader with multiple, easy to use heads for different diameter pipes. The heads are easy to change out and cut through the pipe with ease.

Great tool to have to be able to fix threaded pipe issues - great value for price. Not justified to buy the expensive versions if you don't use it commercially so ideal to have in the workshop for capability when needed.

funktioniert alles gut ist kein Profigerät aber für gelegentliche Anwendung völlig ausreichend erfüllt seinen Zweck

Tool works as it should we always use VEVOR products and are happy with them. Customer service is easy to get ahold of and settle any issue. Only issue we have ever had was with shipping damage

Works as expected, no problems

A handy tool if you only need it for occasional DIY use. The tapered die cuts well enough, but some adjustment of the aperture was necessary to meet the exact diameter of the pipe and ensure a proper thread cut; i.e. deep enough to avoid leaving flat threads. Can be disassembled and adjusted to be more precise, with a bit of effort and a few shims.