Kundeanmeldelser for VEVOR Freseslede, 1625 mm, Bærbar justerbar enhet for utjevning av paneler, Gjør-det-selv-freseslede for trebearbeiding, Panelføringsenhet, Trimmehøvel for utjevning av treverk

I almost bought an expensive woodpecker. Decided to give this a try for a fraction of the other price and it is perfect. Heavy duty, solid, smooth operation.

Buen material para trabajar con madera, poder aplanar tablas y dar dimensiones perfectas, el trineo es amplió para tablas con un ancho considerable

It worked really good. The only drawback was the little bolts would work loose then the rails would move. That the only thing I have any trouble with. I would recommend this item.

I have a 31" bandsaw mill of which I mostly cut live edge pieces for counter tops and tables. Some of the harder woods I need to plane and this sled has saved me lots of time and money. I recently bought a table saw fence system to convert to a slab flating system however it didn't work out that well. After cutting this sled to a size I would mostly be working with it has served me well . I have made several counter tops and tables that have not only paid for the sled but has taken my wife and I out for several very nice dinners. Thanks Anyone interested in a slightly used table saw fence system you can contact me at [email protected]

I have a few slab flattening projects on the go regularly and use to make my own jig. For the price, I thought I'd give this one a go. It works really well. The height and adjustments are really nice, it's flexible in the project size and table you're working with, and overall it does a great job! I wanted to take a 1/2 star off (It only allows full stars to be removed) only because the sliding t-locks didn't actually lock and after a few hours of planing, I accidentally skimmed the aluminum jig with a 1 1/2" straight bit. This would have been prevented in the the sliding t-bar locks worked. Other than that, good product. Final tip, take the time to square up your router mounting plate.

Buona slitta il materiale sembra abbastanza robusto, l'unica cosa che non mi convince molto sono i ganci per fermare la fresa e la scopetta davanti le ruote non toglie molto materiale

Great price and I am pleased with the quality. The assembly instructions are poor, but common sense will get you through it. It comes with 2 acrylic plates for router mounting. I have a Bosch 1617, which mounts perfectly with the normal base, but there are no holes that line up with the plunge base. Also, the hole for the router bit is just over 1" in diameter, which is a concern if you are using a larger planing bit because you can't slide it into the rails past the rollers. I used the blank acrylic plate to mount my plunge base and use my 2" planing bit. The biggest problem is that there is no dust collection on this. I knew it when I bought it, but didn't expect the mess that it made. That's my own fault. Hopefully VEVOR will design a dust collection for this

Grundsätlich gut müsste etwas besser Durchkonstruiert werden, Spiel und Frässchlittenführung nicht optimal.

The Router Sled is of good quality however the rollers are not rigid enough to do heavy duty milling. I modified mine by removing the rollers and mounting the linear guide bearing packs in their place. It made the router sled stronger overall..

works as expected