Kundeanmeldelser for VEVOR Slipevalsemaskin, 610 mm formebredde, metallplate slipevalsebøyemaskin, med 2 avtakbare ruller for lavkarbonstål kobberplate aluminiumslegeringsplate

J’ai été joueur … Il le fallait une plieuse pour de la tôle de 2,5mm en inox afin de refaire un creuser de poêle. Ça passe tout juste mais ça passe… Ça saute un peu mais un petit changement de pignon réglerait le problème. Seul bémol la manivelle qui est un peu courte. En rallongeant ça passe nickel 👌. Mais sur du 1mm, aucun doute que la manivelle d’origine suffise amplement.

I haven’t used it very much lately but it suits my purpose perfectly… I would buy again

I haven't used it yet.

Quality product for the price. Slip roller is very well constructed, does not fell cheap at all. Sadly, the packaging is not sufficient for shipping such a heavy item. The slip roller showed up damaged - one of the adjustment screw handles was broken and the corner of the base was bent. I had to disassemble the roller to get everything back in alignment. Levor refunded $48 for the damage. I really just want the replacement parts, which do not seem to be available. But, the slip roller does work well, even with the minor damage.

These slip rolls are a nice addition to my small sheet metal shop. I don’t really need to roll anything over 24”, so these are the perfect fit. Everything seems to be constructed very well. The quality is as good as I need it to be. It’s quite heavy to move around. One of the plastic adjustment knobs broke off when I bumped it while moving it. However, it’s still functional. My biggest issue is the slip roll disengagement method. It’s less functional than other brands that I’ve used. It involves a sleeve/bushing that slides out of a snug hole in the frame allowing the top roller to disengage. It works well with no material in the roller, but when there’s sheet metal being rolled it can sometimes be under considerable tension and won’t slide easily out of the hole. It can still be done, it’s just more difficult than it needs to be. In my mind this defeats the purpose of a ‘slip’ roll. You need to be able to remove material when it’s in the rolls. Other brands use a lever style mechanism that can be flipped to release the top roller no matter how much tension is on it. Other than this issue the machine has thus far served me well.

Works as it should

Not bad except for damaged cover from shipping Price is good shipping was fast but no answer on recieved the unit with damage to the cover some one dropped it and damaged the cover

Fait très bien le boulot...j ai juste rallonger la manivelle mais sinon impeccable.

This vice mounted slip roller is good quality and works well. I wish it was easier to reset to a previous setting but for the price it is a acceptable

The tool, once everything is assembled correctly, works great. I had two issues to deal with however: damage during shipping and an improperly machined pivot retention bolt. The packaging was horrible. The cast iron/pot metal handle came broken in two which turned my new tool into an 85lb pile of junk. Working with customer service was a nightmare and they have no provisions for sending individual parts which meant I would have to re pack and return, not an easy task with a large heavy tool. I ended up repairing the handle myself and was excited to finally use it, only to discover that the pivot bolt on the top that allows the top roller to swing out of the way, was drilled incorrectly, which caused gear misalignment and jamming as I turned the handle. Rather than have to deal with customer service on yet another issue, I disassembled the gearbox and machined a new pivot hole for the retention bolt. The second photo shows the gear box with the cover removed, the pivot bolt is on the top. I was able to disassemble and rotate the square roller sleeve andmachine a new hole for that bolt. After that, the tool works great. Even though VEVOR eventually refunded me $100 for my troubles, I would not buy again and this experience has definitely soured my attitude for anything VEVOR