Kundeanmeldelser for VEVOR arbeidsbord i rustfritt stål 30 x 36 x 38 tommer, med 4 hjul, 3 justerbare høydenivåer, kraftig arbeidsbord for matlaging for storkjøkken, restaurant, sølvfarget

To start off with, the advertisement is misleading. There are no adjustable feet that go with the table. Having said that, Vevor did give a credit to remedy that particular issue. Beyond that, the legs did not fit into the table top and had to be forced in. In addition, the bolt holes were only drilled on one side of the leg! Better have a drill and good drill bit handy to complete this build.

Although the table has a nice surface and high, it's very wobbly and feels weak while moving around. The connection for the legs doesn't make the table stable. Poorly made.

Ordered 5 of these steel tables for work. One set came without wheels or hardware. I contacted vector to have them send me the wheels and screws/washers that were missing. You’d think I asked for a million dollars. They refuse to ship out the missing wheels and hardware without a photo of the box. I told them the box had a hole (not big enough for wheels to fall out of) but I’d already thrown the box away. They REFUSE to send wheels without a photo. What a joke. Now I have to go find wheels somewhere else which is holding up completing the project and putting me behind schedule. How hard is it to ship missing wheels that weren’t included in the order?? I used to love vevor and this is the first time I experienced an issue with a product but due to their horrible customer service, I’ll be looking for a new place to shop. Oh, most of the tables came dented, too. I didn’t even complain about that. I just wanted the wheels. But they can’t even send a complete unit.

I have to say this is likely the most disappointing item I have purchased from Vevor as all of my previous purchases have been more than satisfactory. This table is NOT heavy duty. It is wobbly and flimsy. The table top itself is the weak point when it should actually be the strongest. I placed a Blackstone portable grill on the table (about 30 lbs). Within 3 weeks the table surface had sagged nearly an inch in the middle, creating a nice concave table surface. And the grill wasn't even placed near the middle, it was near a corner. Checking underneath I realized there is absolutely no bracing under the surface either lengthwise or crosswise, just the thin stainless surface over the 30 inch width and 60 inch length. Oddly the lower shelf is much stronger and has a sturdy lengthwise brace. It does not bend with weight. The table is useless for what I bought it for and can only be used as a prep table. But even that's annoying as everything rolls to the middle. I've tried to get the bend out of it but will only stay where it is supposed to if I can get proper bracing underneath it, properly secured, a task I should not be required to do. Perhaps the bracing was supposed to be there but was missed during manufacturing.?? Otherwise I can't understand why such a large surface is not properly braced. Too much hassle to send back and doubtful a refund would be even be considered after having used it for a month or so. Perhaps there is a remedy Vevor can offer to fix the problem, otherwise it will have limited use.

Stainless steel is rusting. I unpacked and removed the protective film to assemble the product. Under the film was rust! I am having second thoughts about ordering product from Vevor, you just cannot trust the quality.

The worst table I’ve ever bought. Very unstable. No matter what I did it was just total garbage. Don’t buy it

I liked the first one of these "stainless steel" benches/shelves so much that i bought 6 more for various purposes. I now wish I had waited because the first is now rusting despite being indoors in low humidity. Very disappointed, but I guess you get what you pay for.

I liked the first one of these "stainless steel" benches/shelves so much that i bought 6 more for various purposes. I now wish I had waited because the first is now rusting despite being indoors in low humidity. Very disappointed, but I guess you get what you pay for.

I liked the first one of these "stainless steel" benches/shelves so much that i bought 6 more for various purposes. I now wish I had waited because the first is now rusting despite being indoors in low humidity. Very disappointed, but I guess you get what you pay for.

Ordered 5 of these steel tables for work. One set came without wheels or hardware. I contacted vector to have them send me the wheels and screws/washers that were missing. You’d think I asked for a million dollars. They refuse to ship out the missing wheels and hardware without a photo of the box. I told them the box had a hole (not big enough for wheels to fall out of) but I’d already thrown the box away. They REFUSE to send wheels without a photo. What a joke. Now I have to go find wheels somewhere else which is holding up completing the project and putting me behind schedule. How hard is it to ship missing wheels that weren’t included in the order?? I used to love vevor and this is the first time I experienced an issue with a product but due to their horrible customer service, I’ll be looking for a new place to shop. Oh, most of the tables came dented, too. I didn’t even complain about that. I just wanted the wheels. But they can’t even send a complete unit.