Kundeanmeldelser for VEVOR Gjengesett med gjengeskinne, 40 deler, inkludert metrisk størrelse M3 til M12, stålgjengeskinne og -skinner i lager, viktig gjengeverktøy for skjæring av utvendige innvendige gjenger, med komplett tilbehør og oppbevaringsetui

The cases seem to me not to fit the tap and die were scattered all over when you open the lid. It seems to me to work just fine.

Fantastic set, great price, heavy duty case. You could buy a better set but it would cost you a lot more.

Wanted a good set, but also one that included an M11x1 which is an odd sizing but was something I needed to use straight away. Taps are better than average but not presto sharp which is to be expected. Dies are not great but work (mainly smaller sizing has machining burrs swarf left behind and inconsistencies) they clean up but it's not what you expect . The set came particularly handy this week when my vevor slip roller arrived and was terrible quality. I had to use the set to chase 2 or the 3 adjusting screws and retap one casting. Slip roller I would avoid.

J'aurais aimé trouver un coffret avec beaucoup plus de tarauds en pouce. Celui-ci couvre la majorité des pas courants mais plus de choix sur les pas fins aurait été plus intéressant

Very handy set of tools.Tap and dye. Good quality. Good set for its price. The company has good aftersales communication and response when you experience quality issues. Highly recommended.

Aún no lo he usado pero se ve de una calidad aceptable. El uso lo dirá. Su precio es competitivo.

The few taps and dies I have used have preformed as expected. They seem to be of good quality steel and have cut good threads. The adjustable tap wrenches feel cheap and the threads are very loose. The included screw extractor set is a nice addition but I found the largest extractor wasn't hardened as it deformed when trying to remove a burr in a nut. Using a hand file it cut right into it. I bought the set to have all the sizes organized in one case but I found each time I opened it everything was all jumbled together. 6 of the taps always fell out so I used silicone tape to give them a tighter fit in their slots. The die set was packaged in bubble wrap in a box and I cut the bubble wrap using the case as a template. This placed over the dies when the case is closed keeps them in their respected positions. Now it can be opened and everything is where it belongs. As I have only used maybe 6 of the taps and 2 of the dies I've had limited use and time will tell if the rest are of good quality.

Comprehensive range of excellent value. Both taper and plug for each size make it most useful. The case tries to keeps things tidy. A sponge sheet between the two halves of the box would help to keep all in their place.

You can't complain for the money, it's a cheap alloy tap and die set, but it is very comprehensive and beats having to buy a new tap every time you need to run a thread for a different pitch screw. Well worth it.

I have yet to use the taps and dies but on receipt and checking them out- The good: A very comprehensive set which will cover all my metric thread needs. Case to hold all the items in. The Not so good: The dies had a lot of swarf left in them - will sadly really need a decent clean and flush before use. The Tap&Die holder handle threads are not a quality tight smooth fit, rather loose, could be better. Some items are a very tight fit (too tight) a fit in the case, good to not have things loose, but not so good when they are difficult to extract. Not sure what the "The storage case comes with pearl cotton cushioning, providing excellent shock absorption and cushioning properties" specification is about, I found no such material in the case holder slots, just plain plastic.