Kundeanmeldelser for VEVOR momentmultiplikator, kraftig momentmultiplikatornøkkelsett, 1-tommers hjulmutternøkkel momentmultiplikator, 1:58 4800 Nm hjulmutteravtrekker, med 4 piper og oppbevaringsetui for lastebil, tilhenger, bobil

I tried it out on my Foretravel Motorhome, the torque is over 550 ft lbs on the 22.5 Aluminum wheels. It removed them with that tiny handle supplied with the kit. I was ready to use a long handle ratchet or a 24" Breaker bar, but didn't need anything else but that little crank handle. I was wondering if it would scratch my rim, but it uses the lug nut next door. Never touched the rim. The rears, which are deeply set on the duals, also had room to do the same. Of course, after removing the beauty caps and center hub cover. It wouldn't be any different, if you used an airgun or extension and breaker bar. Were was this thing 25 years ago when I changed out big pay loader tires? Would have been a breeze. Just make sure you have the correct socket for your rig. Don't measure the chrome caps, it's the steel ones underneath. If you have two piece lugs, you'll need the square socket for the inner. They're probably left hand thread, so tighten is actually loosen. The inner is opposite thread of the outer on that style. It should be stamped on the lug if you have doubts. I may not use it, but I'll carry it anyway. Just in case, I need to pull a tire to repair, or do an airbag.

This is great thank you !

Bon produit bon vendeur

This was my last ditch attempt to get wheel nuts off an old backhoe. I first tried penetrating oil, 3/4" impact driver, broke the first breaker bar, could not move them with a monster breaker bar and long pipe extension. This tool had them off quickly. I wish the crank was more secure on the shaft. Th nuts broke free with a bang that would knock the handle off. No worries though, it's safe

This is a must have for any week-end mechanic that owns a diesel pusher and wants to do any wheel maintenance. Works as advertised and is much cheaper than less performing multiplier from big stores such as Princess Auto or Harborfreight. And it comes with sockets.

Thank you Vevor for a great tool at a very affordable price it works great!

It works like it is supposed to. Once my dimwit brain figured it out it worked really well. It's great for someone who does the work alone

tres bon satisfait

If a 76 y/o grandmother can get the lugs off a tractor so can you.

Nice unit makes opening wheel nuts a doddle! The square 21mm socket is a strange one to me but some may have use for it… need buy some impact sockets now. Very happy with the performance!