Kundeanmeldelser for VEVOR ultralydrenser, 6L ultralydrensemaskin for plater, 180W justerbar tid, platerenser i rustfritt stål, 40 kHz rengjøringsenhet

Works well to clean vinyl records. Can be used for other small cleaning too.

This product is an ultrasonic cleaner that comes with an add-on device that clamps to the side of the cleaner. The cleaner has a heater for the cleaning solution. It's default setting is high enough to warp vinyl records, so it should be reduced to 25 deg. C (room temperature). The add-on spindle assembly is heavily constructed; but the clamp dimensions for securing it to the side of the cleaner are tight and the sides of the cleaner are of thin (probably less than 0.040" thick). I found it necessary to install flat washers (shims) between the clamp halves to increase the clearance to not be overly tight on the cleaner. The rotating spindle that holds the discs attaches to the shaft of the gear motor via a coupling having a single screw to tighten it to the flat of the motor shaft. Clearance between the ID of the coupler and the motor shaft allow the spindle to wiggle just a bit--but okay. I haven't used the record drying rack--instead preferring to dry records with a lint free cloth to avoid possible residue from the cleaning solution. The cleaner did a good job on a lawn mower carburetor--but that's not the review here. The price was good and I'm generally satisfied.

Easy to assemble and seems to working well. Had a few of the discs that are used to separate the record that the center hole was too small to go over the spindle. Had to drill them out. I wish that there were inserts included for use when cleaning 45s.

Solo comentar que me llegó sin la tuerca que sujeta al motor, y el fondo de la lavadora está llena de pegamento, no sé si afecte el funcionamiento

Unit received in good shape. HOWEVER: - No assembly instructions included (but I figured it out) - Record axle would not fit on motor spindle ( had to drill it larger to fit) - 3 of 8 record separators would not fit on record axle (had to drill them larger to fit) Unit take a LOOOOONG time to come to temperature. Haven't tried it out yet because I'm still waiting.

This cleaner worked as described, delivery was a bit slow but all good. I have started using it on my vinyl collection definitely noticed the difference when playing them.

So far so good. Cleaned a lot of records and and some jewelry with the little basket. Need to purchase a bigger basket for larger items to clean. I'm happy with it.

So far I've cleaned nearly my entire record collection, over 250 albums. I've settled on 30 minutes at 32c... Old albums 60 plus years turn out beautiful. My only complaint (1 star deduction) is the nut on the bolt that holds the motor up slides in the slot and can be a pain to loosen. I'm going to try a washer to see if it will smooth out... and the record drying rack seems like an after thought or something they had from another project and thought "Hey this would work". I did add a washer to the nut to hold the records on the spindle... Planning to add some form of a filter to filter the water for reuse... Could be something Vevor could sell as an accessory.

So the default speed is about 7.5 rpm which is about 7 times to fast. You will have to buy a secondary controller (under 20 dollars) to slow it down. The fit of the motor unit to the tank is a little cheesy you really need to work to get a perfect angle. In this price category there really is nothing better. The drain hose is junk.

Works ok. Nothing spectacular