Kundeanmeldelser for VEVOR universal sylinderforingsavtrekkerenhet, brukes til Mack Cummins Cat på våt foring fra 98,43 mm til 158,75 mm boring, verktøy for fjerning av sylinderforing for dieselmotor, erstatter PT-6400-C, M50010-B, 3376015

Nice product, quick shipping,but only downside for me is it won't work for my engine was supposed to according to other people but the plate is to large for the bore and next one down is to small,but that was not vevor s problem other than that seems to be well made I would just make the stand offs into the cross bar because it's a little wobbly until you get pressure on the tool

It worked pretty well. Just make sure you put grease on the threads before you start pulling and put some washers underneath the propping tubes because their sharp edges could damage a block.

Trekker werkt goed en is stevig gebouwd. Er staat in beschrijving wel dat hij voorzien is voor diesel en verbrandingsmotoren met verschillende trekplaten, maar voor mijn motor was er wel geen enkele trekplaat die de juiste maat had, nog niet bijna. Heb zelf een op maat gemaakte trekplaat laten maken voor mijn motor. Dan werkt het prima, 4 cilindervoeringen uit de motorblok op een 20min.

Bought this to use pulling sleeves out of tractor engines, worked much better than I thought it would, only issue I ran into is that the pipe pieces for the stand were very thin and crushed on the first sleeve. Went to TSC and bought some 3/4x3” pipe nipples and they have worked amazingly. I would recommend getting something stronger than what comes in the box. But overall very good puller for the price

El producto es muy bueno , saqué los cilindros del motor sin ningún problema , para el taller es perfecto

Used this on my Allis Chalmers I-40 to remove the cylinder liners. I had to remove some material from the pulling disc with a flappy wheel on my angle grinder to make it fit. Let's face it, if you need this tool to remove cylinder liners every day, than this is not for you. It's very cheaply built, the bearing on top is very low quality, you must grease it and crimp the bearing case to the bearings or they will fall out. Mine stayed together for removal of all 4 liners. The 2 support pipes are made of tin foil, but they work. I will probably only use this tool 1 more time in my life, and it is available for my friends to use, so they do not have to buy it. I gave this tool a good review, because it did what it was supposed to, and it did not break, "yet"! I have a pic of tool in use, but it would not let me load it?

Great tool. Did what it was made for. I would recommend it .,... ......................,............

Worked well you my have to sand/grind the edges smooth to fit the cylinder walls. The price was right for a one time use.

Puller works well, with the plates to suit the different size liners the flexible head allows ease of fitting down the liner. The friction bearing to provide assistance with the puller failed as it wasn't heavy duty enough to withstand the forces pulling a very tight liner out.

Good puller for the price comes with several different types sizes to accommodate different sleeves. Will work with a 1466 international. Beats building one from scrap.