Kundeanmeldelser for VEVOR 5" superlås-skrustikke for NC/CNC-maskiner, benkklemme-skrustikke, høy presisjon, skrustikke, klemme-skrustikke, CNC-skrustikke, låsbar skrustikke, boring, 125 mm bredde, CNC 24KN

box was very damaged and the screws that hold the keys to the vice were not in the box vice was not damaged and works well just very poor packaging

Aan één kant was het sleufgat voor de bevestiging niet bruikbaar door een gietfout. Deze zat half dicht. Eerst open moeten frezen. Maar de klem is wel onwaarschijnlijk goedkoop dus dit soort missers in de kwaliteitscontrole moet ik maar voor lief nemen denk ik. Verder een prima klem. Ik heb hem al meerdere keren gebruikt voor freeswerk en zwaar boorwerk.

Ma note n'est pas que pour l'étau, en effet ce dernier est très qualitatif, bien usiné et ajusté. J'en suis très satisfait. Cependant, il semble déjà avoir été utilisé. J'ai retrouvé quelques copeaux, et une marque de perçage dans le fond de ce dernier ( plus qu'une marque d'ailleurs, un trou sur le filetage). S'il n'était pas aussi lourd, j'aurais demandé un retour ou un remplacement, mais au final cela ne semble pas modifier les fonctions de ce dernier, notamment grâce à sa qualité de fabrication.

Completely misrepresented in the photos and description. This vise does not have ACME threads. It has standard metric bolt threads. This is a huge difference in the quality of the vise. The vise at this price point will do everything thing I need it to do, but I was expecting it to match the ad and pictures.

I ordered two vises in hopes they were close to the same height so I could hold one long piece of aluminum with the two vises. Height difference was almost 1mm.

Mounts easily, feels heavy duty and weighs a lot. Jaws are not parallel. Threads are really tight and hard to turn. Takes 2 hands to turn if not bolted down. 1 to hold the vice while you turn the handle with the other. As much as it weighs the handle should spin freely.

Not bad for the price

The vice seems solid.

Not a Kurt vise. Made alot cheaper, but you can buy 5 of these for the price of a Kurt vise. Depends on what you need them for. They are alot lighter . Good for certain quick jobs.

No idea why Vevor suddenly asked me to 'review my recent purchase', I bought the vise in 2021! It needed stripping down, cleaning and deburring to start with. I then had to scrape the bottom surface flat as it rocked 0.002 corner to corner as received. The moveable jaw lifts quite significantly as the vise is tightened, and no adjustment on the poorly machined ball socket seems to help. It is possible to tap it down as you tighten the jaws but that makes it a bit of a pain when setting up. The jaws are perpendicular to within a few 10ths and are mostly straight, so tramming in is possible so long as you only use a half-thou indicator and don't look too closely. At the end of the day, it's perfectly good for day to day work, and with a bit of imagination you can do some reasonably accurate stuff with it if you put the time into setting up. Good enough for a home shop, and well worth the small amount of money it cost.