Kundeanmeldelser for VEVOR 20U åpen ramme serverrack, 58,5–101,6 cm/223–40 tommer justerbar dybde, frittstående eller veggmontert nettverksserverrack, AV-rack med 4 stolper og hjul, rommer alt nettverksutstyret ditt, IT-AV-utstyr, ruter, modem

This is a decent rack, especially for how little it cost I can't complain much. Although I'm about to describe what I didn't like about it, I would buy this rack again if I needed a second one. For about a third to a quarter of the cost for something of comparable size elsewhere, it's worth making a few adjustments to make it work. First thing, although this rack is(I think) rated for around 500 pounds, the casters and caster plates don't do well with any real weight. The caster pins and the mounting plate were both bending badly while I was getting it loaded up, and I ended up just removing the casters altogether and bolting the rack to a large 1200lb Harbor Freight furniture moving "skateboard", and it works great. Second thing that I didn't expect but should have, the vertical rails are a bit thinner than the more expensive racks, and bend easily with unsupported cantilevered loads, even light ones. This rack will definitely need server mount rails, or a mixture of the rails and fabricated shelves like I did. It's a pretty solid little rack, and is doing well. I configured mine as 28" depth, so the top cover plate doesn't cover the whole top, but I use the top as a place for my 3D printer enclosure. If you're networking on a budget, this is a good rack to get started.

Bonjour, Après plus d'un an d'usage, rack robuste mais les vis autoperforantes font que le démontage et le remontage sont parfois délicats. POINT très NÉGATIF si le rack est lourdement chargé (100kg), les roulettes semblent adaptées pour des charges lourdes MAIS LES SUPPORTS DES ROULETTES se TORDENT très FACILEMENT (tôle trop mince) et vrillent la roulette.

Rack arrived quite fast and packaging was in good condition. Only problem was that assembly instructions were missing. Anyway, rack is quite easy to assemble, so instructions are not necessary. Also those can be downloaded from product page. About rack itself. Paint job is not best. There is scratched and other flaws in paint. Also paint is quite thin, so it scratches quite easily. Also, top cover does not cover whole rack when depth is increased. Top panel cover whole top only when rack is not expanded at all. Most problematic is that rack is little flimsy. Product page says that you can load up to 500lbs (226kg) of stuff to the rack.I have loaded some 120 kilograms of equipment to the rack, and wheel mountings are starting to bend. Also when moving rack around, it feels like it is going to collapse. I do not have needs to move it around. It might be that i remove wheels and keep it stationary. Conclusion is that rack is quite nice for it's price.

Look at the metric sizes as the rack cannot get as shallow as 15", it is a little over 23". Good, solid, small server rack, but does not fit in the location I intended to put it in.

Everything works great. Went together easy. Now sitting in the server room with 3 Supermicro 36 bay storage servers running on it. The only problem is with the top plate. It only fits with one depth. If you extend it at all, the top won’t fit on it and you will have to make one for it. I actually cut and stained a piece of 1/4” plywood for it.

Easy to assemble and surprisingly sturdy. Although I should have got higher. But I didn't know better.

A little time consuming to put together, the instructions are a little hard to follow but not as bad as most items similar. Once together works as intended and appears to be sturdy

The metal plate that goes on the top was pretty badly damaged, the corner was bent meaning the plate had to be orientated in a certain way7 or it wouldn't fit. There is a lot of scrapes on the top plate. Everything else was alright, though the screws requiring an hex key is annoying, just use regular flat/phillips head screws.

Great piece of equipment, it did not disappoint, the metal uses good quality. The only complaint is it is a little hard to put together and also a little hard to figure out how long to make it. But once your past that its great, I have two servers and a dream machine pro on it with no issues. This could also be used for sound equipment which would be nice since it comes with wheels to move it around easier. Overall great product!

I ordered my server rack and it arrived quickly. It definitely could've been packed a little bit better as there was some paint that had scraped off of it from rough shipping. But I cant blame that all on vevor, the shipping company definitely didnt treat the package nicely. Overall the rack is great quality and I would buy again.