Kundeanmeldelser for VEVOR 220V elektrodesveisemaskin, 140A ARC/Lift TIG-sveisemaskin med stort LED-display, 2-i-1 bærbar elektrodesveisemaskin med varmstart, lysbuekraft, anti-heft VRD, MMA-lysbuesveisemaskin for sveising
Kunde anmeldelser
Hvordan kundeanmeldelser og -vurderinger fungerer
Kundeanmeldelser, inkludert produktstjernevurderinger, hjelper kunder med å lære mer om produktet og avgjøre om det er det rette produktet for dem.
Den samlede vurderingen vår er ikke et enkelt gjennomsnitt. Vi prioriterer autentiske og troverdige anmeldelser og filtrerer ut duplikater eller ugyldig innhold før vi beregner den endelige poengsummen. Dette bidrar til å sikre at vurderingen virkelig gjenspeiler reelle kundeopplevelser.
Anmeld dette produktet
Del tankene dine med andre kunder
Skriv en anmeldelse
21 Anmeldelser
Anmeldelser for Gjeldende Produkt
Verifisert kjøp
Bilder og video kun
Oversett alle anmeldelser til Norsk (Berkmel)
Henry Salim The weld was well worked.
I thought it came with a TIG welder.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Good little welder for small projects
It will weld on 110 but it will trip a 20 amp breaker my suggestion is to go 220
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Adam Jewett Tugboat engineer and home mechanic
Bought for my offgrid campspot for the occasional repair. Tested it out in my shop at home and was surprised how well it ran 3/32 7018 and 6010 on 120 volts input. The welding leads that came with it could be atleast 3 or 4 feet longer. Great little entry level machine for someone that wants to learn how to weld or the weekend warrior that tinkers in thileir shop. Definitely recommend.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Alan Egan Mr
For the price paid this is a bargain purchase
1 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Marty Handyman
The main only issue I have is with the ground clamp. Made of thin sheet metal and was deformed/damaged right out of the packaging. And with use it only got worse. I had to take the cramp from my wire feed MIG unit and put it on this unit to finish the job. So, I'm not too happy about that. Also, when operating using an input voltage of 120 VAC on a 20-amp dedicated circuit, it has the tendency to trip the 20-amp breaker if you are welding at settings from 100-120 amp, for more than 10 seconds continuously. I've tried using it on 2 different dedicated circuits with the same results. I've just ordered all the supplies to switch the input the 240 VAC to get rid of this issue.
7 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Samuel Good welding machine
Beginner welder, have used it for a couple of hours and it works good.
Came with european schuko plug for 230V, correct for my country, not with the type and adapter on the picture.
Have tried it with 2mm 50A, 2.5mm 95A and 3.25mm electrodes up to 160 amps on different materials and it weld pretty good and does not trip any fuses.
The ground clamp is a simpler one, not the one on the picture.
The included ground clamp and electrode holder feels cheap but can probably be upgraded easily if it breaks.
But you get a good welder for the price for joining metal in hobby projects. I recommend it
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Kevin Farmer
Very impressed for the price. The stinger could be of better quality though
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Ryan It works well
Works well. Good for small projects
2 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Rick Willis Ask
Works as it should, shut off on 110 v so I ran 240 outlet for more power
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Frédéric Lesage Poste à souder
J'ai soudé 15 baguette 2.5
d'affilée il s'est pas arrêté
1 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
