Kundeanmeldelser for VEVOR hoggesag 14 tommers gjæringskappesag for skjæring av metall tørrkappsag 45° vinkel

As described, the clamp isn't the best quality have trouble holding the metal properly when cutting

I've had minimal use of this saw since purchase, though can say I'm happy with how its cuts mild steel 25mm x 8mm and 1/2” tubing with ease. The only down side I’ve found with this saw, is that the base isn't perfectly flat, it could do with a thinker more robust base, and the clamping jaws are rather weak in design, and adjusting protractor isn't perfect, so don't expect precision cuts. Lastly I think VEVOR should offer “more spares items” for these types of tools, example an additional parts accessories lists, like blades, drills

Good heavy duty saw that makes good smooth cuts that are cool to touch right after making the cut. Used cutting 1/8 4x4 square tubing and up to 5/16 4" flat bar. My only complaint is that the angle fence isn't true and you need to check your angles with a square before making any cuts.

This size very poorly designed. It cuts fine but the fence is crooked and hard to use. I also had to get the saw fixed by an appliance maintenance place because it didn't work when I got it

The base of the unit I received was warped from the factory. A part sitting in the clamp can rock back and forth up to 2 degrees with no way to know if the cut will be square. Because it is warped directly under the blade, the free end of the cut has a possibility to bind on the blade as the cut progresses. Additionally, the angle adjustment is inaccurate. The angle adjustment pivot has something like 1/8" of play so you could never make a miter you could trust to be reasonable accurate to build with without measuring the angle by hand somehow. Both of these problems would be easily fixed if the company would accept the defect in the product but I contacted Vevor about the defect and this is their response: "The base has a slight curve: This is due to the base's thickness, but it does not affect the balance of the cutting process. Cutting angle issues: With any machine of this type, accuracy is limited, not precision." Its surprising to see such an obviously problematic defect dismissed as acceptable by the company. They company will not accept a return for the saw and they offered me first a $25 refund then a $75 refund to help cover the cost to repair the base. I guess I'll be designing a new base for this before I can use it. I didn't have high precision expectations given the low cost of this saw but if you want to make reasonably square cuts, I'd look at one of the other options.

Wrong item was sent. Customer service not answering. No more orders from vevor.

Good luck trying to make a warranty claim productnever workedas intended, tried for over a week to get the issue resolved finally had to dispute the changes with my credit card

This sat in the box for 6 months until I got my shop built and the first time I go to use it, the blade is bent.. right out of the box it was bent. Not to mention that it's grossly underpowered. Don't believe for a second that this thing is 2800 Watts. For $400 I expected at least a straight blade.. Just a word of caution... check this stuff as soon as you get it.. In this case I was straight up ripped off.

Saw blade wobbles and it appears that the shaft is bent I have had difficulty getting a replacement or refund I can’t load the video that shows the blade wobbling and I can’t load the picture that shows the cut in the metal I tested being a 3/8” wide to the blade wobble