Kundeanmeldelser for VEVOR 305 mm benkborepresse, 550 W, benkborepresse, 340 til 2200 o/min variabel hastighet, 0-45° vippbart arbeidsbord, med laser og LED-arbeidslys, bordboremaskin, for trebearbeiding, metall

I love the easy adjustments. I've been drilling deep holes in some pretty dense wood. It works but you have to be patient and retract the bit regularly, like with any drill press. Satisfied for now.

Muy completo

The runout on the outer and inner spindle runs true within 0.001”. The supplied arbor has a runout of 0.002”. And the runout of the supplied drill chuck was 0.006”, with visible wobble at the drill tip. I clamped a fence to it, and drilled 30 holes evenly from the same reference edge, and was annoyed that the holes deviated so much from the edge. So now I am replacing the chuck. Overall, for the price this is a great tool.

Acheté le 2026-08-30. Conforme à mes attentes.

Dommage qu il faut bouger la couroi pour changer de vitesse. J avais mis a 2500 tours et la couroi s effiloché. Je l ai mise a 800 tours pour tester avec une cicloche et sa va sur du sapin de 2 cm .a voir sur un bois plus dur ? Sinon pour le perçage c'est impeccable. Pas très pratique non plus pour régler le plateau avec la manette qui se trouve a gauche et a l arrière, difficile pour régler. Sinon la machine est bonne

Installed and well used. Only issue - top cover came slightly misaligned and wont straighten but doesnt affect operation.

The drill press is as described, however the build quality is less robust than expected. Reasonable value for money but if I had my choice again I would spend another $100-200 for a more sturdy unit.

I just purchased 10" model two days ago. When I tried to tilt the table, following the instructions in the user manual, the locking pin which locks the table at 0 degree bevel angle got snapped and the pin is now stuck in the mating hole of the table. Apparently, the threaded part of the locking pin was somehow bent as shown in the picture. I'll try to contact the customer service and see if they can send me a replacement for the table. Other than this issue, the drill press works as described.

Received within 3 days or so, package in good condition. The Items were in good condition, contents matches description. --> In Short: I was impressed by how CLEAN everything was, no metal swarf or sand or other hard to remove grime, surprisingly no or very minimal burrs, good paint application. The main post/tube is well ground, including its Aluminium machined bottom cap. It's very thin tubing however, less than .049" wall thickness. --> Works fine without grinding noises, the slack in the quill+quill spring/gear +rack is noticeable (and expected) but doesn't cause excessive wandering in light duty use (twist drills up to 7/16" in soft wood, plywood, MDF/Hardboard/Particleboard) --> The provided 1/2" keyed chuck works smoothly, the table bracket keeps the table in place and only required minimal lapping* and lubrication. *Lapping the top flat on a surface plate to help in setting up the table square to the column. --> The quill has visible movement side to side + front to back and the Arbor has an odd Axial play (up down by about 1/4"), but doesn't cause excessive runout or wandering issues in light use yet. THE ISSUES: --> The Base Plate and the Table are BENT/BOWED, Had to replace/modify** : - Both made of stamped sheet metal, and both of them are BENT/BOWED. - The Table is not useable because of the excessive curvature! - The Base plate was not flat enough on its feet to keep the drill stable, and had significant burrs. ** I had spare parts from a broken down store bought drill presses that were gathering dust and modified them to fit this Vevor 8inch model. --> The MOTOR BRACKET keeps the motor misaligned: - With the motor angled (tilted) no matter the adjustment in tension, makes the belt grind itself on the pulleys. --> The DEPTH STOP is flimsy and unreliable to control the depth with any sort of precision. But it is useable for rough adjustment. Overall it works surprisingly well and I hope it will help me, along with the Vevor MX 8x14 Mini lathe I also purchased and reviewed, to repair my bigger Floor Drill Press purchased from a Canadian retailer for $$$$ (that retail store drill press was built so sloppy it drills worse than handheld, and it required so much cleaning of casting sand and swarf...)

Tres bien mais il y a un probleme qui gache tout si on ne connait pas la solutions. Ca fait Un bruit horrible Quand on s'en sert, le probleme vient du cache noir et du ventilateur qui se touche et donc ca fait un bruit horrible. Il suffit de démonter le cache (cf photo) et de le remettre le plus bas possible pour que ca ne se touche pas, c'est monté en usine et cette erreur gachera tout pour celui qui ne le sait pas. Sinon je suis trés content du matériel, j'ai fait un packet de trou