Kundeanmeldelser for VEVOR Dental Sandblaster 2 Penner + 2 Tanker Tannlaboratorium Sandblaster med LED-lys og stort vindu Sandblastermaskin med fotpedalkontroll

Ein bisschen schwach,für ganz kleine Sachen ist okay sonst ist für große Sachen nichts gedacht,preislich ist ok

Ordered based on use in a Youtube video. Worked as advertised using a small portable compressor. Compressor ran often but was able to keep up with blaster. Pattern is very tight due to small orifice on pens. The manual is very poor but the blaster was easy to connect and begin using. Tried first with supplied grit and it worked ok at removing paint from an old model car I'm restoring. Pressure makes a difference as you would expect. Worked well with some 120 grit media I had but didn't work with 80 grit. I rated the blaster lower based on a couple problems. First - there is a connection for a vacuum. I used a small 5-gal bucket topper vacuum directly connected to the blaster. This created a high vacuum inside the blaster that made it impossible to work. The gloves were stretched to the max and the lid was locked down tight. Worked around this with a vacuum break at the connection adjusting the hole size until the system would work as intended. Second - emptying the grit containers requires either a vacuum or turning the blaster upside down. This works but is annoying. Third - called about getting replacement parts, specifically the nozzles and they are small and i'm sure i will lose one at some point. I was told by customer service that they do not sell any replacement parts for this blaster but would cover any breakage up to one year. Seems strange they have parts to cover warranty issues but none available for purchase. I did buy some small blasting tips from Harbor Freight that have a 1/8-inch opening. Removed the small tips that were supplied and attached the larger tips with duct tape. This made a better pattern and worked better with larger 80 grit media, but my compressor couldn't keep up. I think this modification would work with a slightly larger compressor. Unfortunately, I'm limited to my small compressor at this time.