Kundeanmeldelser for VEVOR hydraulisk, 12 tonns H-ramme gulv, stempler, justerbar arbeidsbordhøyde for bøying eller retting av metall, garasjer eller boligverkstedpresse, oransje

Solid tool for the price.

got the job done. Had to make a few extensions as I was pressing out a long heat exchanger from a casing but it worked just as intended and saved me big bucks as the press was one tenth the cost of a new heat exchanger

I had to weld the bottom of the bottle jack to the cross section so it wouldn't slide off in use. Works well otherwise.

I really liked everything about with the exception of the actual jack. It takes a lot of pumps to get the thing to move and yes the valve was closed tight. It still worked for the small job but doubt it can really provide 12tons of pressure. I will end up replacing the jack as I like the rest of the setup.

Most issue i have is with the platform, could've made it one solid piece instead of split held together with 2 bolts. When you tighten the bolts, the platform essentially becomes a clamp and you cant just pull the pins to move it up or down, have to loosen bolts first, adjust then retighten bolts. Also could've slanted the metal guide brackets on the top press that guides it on each side. There's about a 1/4" gap on both sides and when go to press, itll not he centered, so you have to pump the handle while guiding the top portion.

Mise a par la visserie que j'ai du changer pour plus sérieux l ensemble est conforme et fonctionne très bien . Rapport qualité prix très correct .

Manual is a little off in the assemble process. Well made and easy to use! Should last a long time

I bought this to transfer the wheel studs from the old wheel hubs to the new. Worked just as I anticipated. Will be useful in the future for what I do.

Très bon rapport qualité prix.

All in all everything was ok, there was damage in shipping but Vevor took care of that right away.