Kundeanmeldelser for VEVOR Manuell Avisoleringstang Avisoleringsmaskin 1,5–25 mm (0,06–1 tomme) Hånd- eller drilldrevet

Works well ! Now I going to ask you again like I did on the last review ! Can I buy replacement blades for it ????????????????????? Send the answer to my email!!!!!!!!!!!! Thanks!👍🏻

Ok ok ok ok ok ok

It works well, but i needed to build a stand for the drill and stripping machine to work together.

Works great with the bigger gauge wire!! The smaller gauge wire was a challenge to keep it centered on the cutting wheel. It saved me a lot of time and effort. Definitely worth it if you have a lot of wire/cable to strip.

Works great on single straind copper wire but struggles with some braided copper wires

Works well on larger wires and struggles on thinner gage wires

Works great for the price, all you need for the majority of stripping, i was doing anywhere from 14g all the way to 3/0. The only issue is you need to set the blade depth very specifically, and if it's too much, it will put more stress on the mechanism and slip off. it takes some time to dial in, but it works great with the drill attached

It was a little hard to get the hang of at first, but is pretty simple to use once you get a rhythm going. I have only used it with a drill, which is a great feature. The hand-crank is only usable if you mount it to the edge of a table, otherwise the crank arm itself will hit whatever it's mounted to. The blade also comes loose really easily and veers off-center, which causes the wire to slip off the track. Despite those things, it's great for the price and I have been able to strip a ton of wire pretty quickly.

Pretty good but the blade in mine is slightly misaligned which does make it not work very well unless I guide the wire through. So I can just start it and go I have to guide the wire the whole time but still faster than by hand.

Very easy-to-use and saves lots of time