Kundeanmeldelser for VEVOR mekanisk nøkkelfri dørlås, mekanisk dørlås med 14 nøkler, mekanisk dørlås med tastatur og justerbar tommelknapp, vanntett nøkkelfri portlås i sinklegering på én side, for hjemmekontor

Simple and good lock

Exactly what I needed. Works great, easy to install and use. Highly recommend.

Good enough product especially for the price. Easy to install easy to understand instructions what more can you ask for?

I purchased this lock so we could access a manual garage door without having to run inside. The build quality seems good. The only issue was get it to work for my application. I ran into some placement issues and ended up mounting it in the middle of the door as near the edge, it would hit the weather strip. I used some flat bar steel to extend the slide lock to the track but couldn't use the regular hole as this lock moves 3/4" while the original slide bolt moves just over 2". If there was a lever pivot to increase movement, that would have worked to attach to the original slide lock but I went a different route. I had some aluminum around and manufactured a bracket to run the flat bar through, using the original mounting holes for the slide lock. I also used one of the included receivers and attached it to the tracks with another piece of aluminum, riveted to the tracks. I'm reasonably happy I got it to work but it was not a simple installation by any means.

Installed on garage door and has worked well over the summer. Will see how it handles a Canadian winter. Instructions were a little unclear regarding what length to cut the rod and which direction to install it but I was able to figure it out through trial and error.

Installation délicate, compte-tenu du type de la porte : mais le résultat après diverses adaptations est nickel. La serrure me parait de très bonne qualité.

it is good for the backyard door. easy installation.

I had a lot of hope for this lock since it had all the features I wanted. Unfortunately there is a design flaw that ultimately led me to return the product. The hole (on the back) where you turn the lock handle direction is small and if you use a common screwdriver bit it damages the ridges used by the flat bar. I cannot find such narrow bit that would work. This seems like a specialized tool that vevor should provide, or redesign the hole. More troubling though is the endless back and forth with the support team who promised me that 'engineering' would research and get back to me. Twice I had to contact support to find out a status. 'Engineering' never provided any response. Support didn't want to provide me a refund. Eventually I just sent the product back and asked my bank to refund me on my credit card. Cost me $20 to send it back since it was a bit heavy. Vevor did not reimburse. Sorry, this is way too much trouble for me to with this merchant in the future.

This lock broke within a few months. The challenge then became how to remove it. This can only be done from the inside. I had the lock on a door that is at a height with no other access. I had to climb across a very narrow ledge to break into a window. Not a great design, and quite cheaply made.

Bonjour. À ce jour, ma serrure je ne peux toujours pas mettre le code. Il y a vraiment un problème dans le mécanisme malgré les tutos que vous m'avez envoyés et que certains je ne peux pas lire. J'ai fait tout ce que vous avez demandé. Impossible de faire fonctionner le mécanisme. À ce jour, je désire le remboursement. Cordialement fred