Kundeanmeldelser for VEVOR mekanisk nøkkelfri dørlås, mekanisk dørlås med 14 nøkler, mekanisk dørlås med tastatur og justerbar tommelknapp, vanntett nøkkelfri portlås i sinklegering på én side, for hjemmekontor

I bought 6 of them for our student rental. the quality and durability is still wait to be seen. I can only speak of the installation and my initial impression. build quality is solid. the entire assembly feels very solid, heavy in other words. installation: is fairly easy, but can be improved. this has something to do with the design. [read on] the design improvement ideas: 1. the keys travel a lot more than people commonly expected. I know it is due to the mechanical mechanism. But if you can change it to half the travel depth, it would be a lot more user-friendly. 2. The vertical layout. with most of the doors, the handles are at hip level. That means people have to look down to see the buttons. Making the keypad (or just the keys) slightly angled upward makes it easier to read and operate. 3. no lock to the unlock position. If a person leaves the room for a few minutes, there is no need to lock the door. But this keypad locks every time. 4. It requires a hole on top of the keypad to hold the keypad in place. This means if I don't want to use this keypad anymore, I have a hole to patch and paint. A better way is to have two screws on each side of the stem, like all other locks do. This not only secures the keypad from moving around. It also saves the requirement of using the screw-in a strike plate, thus reusing the current hole without additional work. simple change here can save a lot of installation time. I spent about 10 mins installing each keypad, with half of the time spent on mortising the door for the strike plate. Even after I made a jig for it.

For my garage, this is a good substitute for a standard locking set as I no longer need to fetch a key every time I need access. The cost is reasonable and I will never worry about dead batteries. So far, it is working well for my purpose. However, there are some things to be aware of: 1. The code combinations are limited because you can only use each alphanumeric once, and; 2. The order of the code entry seemingly doesn’t matter. 3.. The instructions for changing the code are accurate but the indicator marks can be difficult to make out under poor lighting (or with old eyes), so make sure you “play” with it outside of the door until you are 100% happy with the way it works before you install it. 4. The bezel width just very barely covers an exiting hole for a standard North American lockset, which can make installation finicky on an existing door. You may even need to infill the old lockset hole with a round plug before drilling new holes for this unit. So, for a new door with no pre-existing hole, this would go much more smoothly than for a retrofit, I suspect. It would be nice if the kit included an infill plug for old doors, and maybe a slightly wider bezel for a bit more coverage of old holes. And if you have your heart set on a specific code, be prepared to make compromises. Finally, if your door has a standard rectangular window with plastic trim, there could be some interference with the bezel. I had to trim the plastic molding slightly along the bottom corner to allow the new mechanical unit to fit properly.

I like it very easy to set up and has a good quality.

Serrure de qualité je recommande

Je trouve cette serrure a code très bien et facile a monter

Simple and good lock

Exactly what I needed. Works great, easy to install and use. Highly recommend.

Good enough product especially for the price. Easy to install easy to understand instructions what more can you ask for?

Needed to replace a non-fire-code compliant fixture, and wanted keyless entry as an option. This lock gives me both keyed and keyless as needed, and looks and works perfectly. Not quite as customizable on the code as I hoped but still good enough for my application. This door is a little thicker than the set was designed for, so used longer mounting screws and I re-used the square shaft from the original lockset.

Nice looking unit, easy install with clear instructions and all necessary hardware included. My installation was a bit unorthodox in that I installed it on the side post rather than the door, using one of the plastic base mats as the door stop. Suits my needs and is easy to use with the option to set an ‘always open’ mode or switch it back to the ‘code to open’ mode. Time will tell how it performs in the outdoor position with corrosion resistance. .