Kundeanmeldelser for VEVOR Arbeidsbord for fresemaskin, kryssglidebord, 10,2 x 18,5 cm, fiberforbindelse for benkboreskrustikke

Rapport qualité prix excellent.Typiquement l'outil dont on se passerait s'il était plus cher et qui facilite pourtant bien des travaux "amateurs". Très bien.

Good price-quality ratio, express shipping, great contact with the store. One of the few stores that cares about the customer and the good name of the store! However, the product has minor defects that can be removed by yourself. These are play on the cranks and the metric scale is carelessly engraved he was not influenced by it. I also recommend that you lubricate all friction elements well (for this I recommend graphite grease). DIY enthusiasts can confidently recommend the product!

Abbastanza soddisfatto. Sono stati necessari degli aggiustamenti causa distanziali in alluminio lavorati grossolanamente di elettroerosione e con superfici non piane. I volantini presentano la divisione in 40 tacche, ma le viti hanno passo 2 mm. Per il resto va bene. Da considerarsi valida.

Qualche problema nel traking della spedizione e ritardi rispetto ai tempi previsti. Il tavolo a croce arriva con qualche problema di corrosione specie sui cuscinetti reggispinta che possono essere ovviati effettuando una adeguata pulitura ed ingrassatura. I uscinetti al limite sono sostituibili con piccola spesa. Il resto sembra tutto OK, ottimo scorrimento x y.

I oggetto acquistato arrivato regolarmente, forse con un po di difficolt di tracciamento. La maniglia di chiusura della morsa non precisa nell inserto quadro, bisogna aggiustare con la lima. Qualit/prezzo pi che buona.

I needed to drill a cirlcle of holes on my drill press. This was used in conjunction with a Vevor 4 inch rotary table. I had to disassemble this prior to use as the anchor for the Y axis thread dropped out of its location and jammed the table. Drilling and tapping a thread to hold a large body washer may fix this. While you’re down there …..i cleaned everything and lubed the parts with teflon spray.. The Y axis gibs are inconsistent - snug in one position, jammed tight further along its travel. I back them out, get it where I want it and lock them down.

No esta mal contruida pero es algo tosca y dura. Hay que ajustarla y limpiarla, No tiene un manejo facil.

Produits à modifier avant utilisation, inversion d'un des réglages de table sans cela la manette est dans la poutre de la machine, pas mal de bavure en enlever, malgré les réglages d'ajustement des guides,des points dur sont présents avec une légère ondulations lors de l'utilisation......

A set of 10x26x8 bearings ,a few shims and a lot of clean up made this milling table surprisingly good. If you are willing to put in the time you can't find a better table for this price. The fitment of the bearings needed a little machine work on the bearing pockets but other than that it was mostly clean up work. Polished the Gibbs and removed all the stray paint. I got mine on sale for about 60 something dollars and I feel like I stole it.

pas entièrement satisfait (petit ,qualité pas top ) je pense que j'ai fait un achat non réfléchi cordialement