Kundeanmeldelser for VEVOR Høytrykksspylerpumpe, 25,4 mm (1") aksel horisontal triplex stempel, 276 bar (4000 PSI), 15 l/min (4,0 GPM), reserve høytrykksspylerpumpesett med feste, kompatibel med Simpson MorFlex 40224, 40225, 40226, Santoprene

pump was damaged could not test it, have to first buy some new fittings.

I ought this a few weeks ago. It was installed with o issues. The pump ran well for about 30 minutes then the pressure output dropped significantly. I guess I’ll try to return it for credit.

Purchased the 4gpm 4400psi pump, installed it with no problems and it works but does not produce the pressure stated. I have a new nozzle, 13hp motor, which is what is specified to operate with but my pump at full speed only produces 3000psi, which is good pressure for most pressure washers but I expected it to produce the rated pressure of 4400psi. VEVOR could not explain why it did not produce the pressure and only stated that the pressure, while spraying, will be "slightly less" than the advertised pressure. First they offered my a refund of $20 and I could keep the pump but I fussed and explained that its not what I ordered and that a pump that they sell that is rated for the pressure mine produces is $50 less than what I paid for this pump. They agreed on a refund of $50 and I keep the pump, but I still have not received the $50. Beware that your pump probably will not produce the rated pressure. Buy the pressure gauges made for the pumps if you want to actually see what it is producing, otherwise you have no way of knowing what the pressure is. Mine does fine at 3000psi its just the fact that I ordered one that should have produced 4400psi while spraying. I also got the three year warranty so, we will see if it goes that long, and how hard it is to get a claim resolved. Used mine for about 3 hrs so far with no issues. My motor is way oversized for the pump but still uses lots of fuel, but I was expecting a 4400psi pump.