Kundeanmeldelser for VEVOR naglemutterverktøysett, 9-tommers skralleverktøysett, med 10 dorner og 100 muttere, metrisk og SAE-størrelse M5, M6, M8, M10, M12, 8-32, 10-24, 1/4-20, 5/16-18, 3/8-16 UNC, med en robust bæreveske

The tool arrived quick enough, looks well made. I used it to repair stripped threads in my snowblower. I used the 1/4-20 rivnuts. The first one worked perfectly, the remaining 5 not so good. After compressing the rivnut I couldn't unscrew the tool easily

The tool is stout enough for setting the rivet nuts, but the automatic removal components are sticky and weak at best. I would suggest saving your money and buying the manual setter. With time and lubrication the tool may start to automatically unscrew after setting a rivet nut, but the parts are very small and will probably wear out first. All the setting dies are hardened steel and changing size is quick and painless. The case holds the tool and dies well, but the pockets for containing rivet nuts is non-existent. I ended up buying a fishing tackle box to keep the rivet nuts in.

This tool works quite well for installing rivet nuts if you have a ton of space to use the handles. This tool does not work in tighter ish spaces and I have to use my diy rivet nut installer which takes forever. When this works, it is quick and flawless. Switching sizes is easy and quick. The main tip i have is that the metal shaft that the mechanism slides on needs to be heavily greased In order to avoid wrecking it.

Outil solide mais arrivé défectueux de sorte qu'il a posé deux rivets et ne fonctionnait plus. Pour ceux à qui cela arriverait, une vis interne doit être collée pour ne pas dévisser. Simple mais frustrant.

Have bought two of these the first one stripped out on first use tried to return with no luck the second rivet nut driver work as it should.

Mandel stripped on first rivet nut sent video as requested and had problems receiving file have tried several times with no luck this is not like Vevor so i just bought a new one with no problems

deixou de funcionar apos a 1ªutilização

It worked pretty well. Handles need to be a little longer for the larger zeros. The threads pulled out of the nose of it after installing 8 3/8 nut rivets. I will be asking for mine to replaced or a refund

It seems like ok quality but no good after doing 6 nutserts. Thread damaged. Disappointing!

I clicked the wrong Icon today when checking on the location of my package. This package has rattled around in central Indiana and even wound up in Franklin, Ind. I will give the trucking experts until dark to fine a lost shipment complaint. I Have by no means received merchandise.