Kundeanmeldelser for VEVOR silketrykksett, 6 deler silketrykkrammer i aluminium, 20x24 tommers silketrykkramme med 160 netting, høyspenningsnylonnett og tetningstape for T-skjorter DIY-trykking

Lo spessore del telaio è 2 cm e non 2,5 cm.

These are not that great in quality. Very disappointed as the frames are very flimsy. We have to put two together just to use them.

These a SUPER LOW Tension screens! Thought I would give them a try. For me they will not work. While coating with a scoop I had good tension on the sides but it will lay down a super thick layer on the middle. Tried 110 and 160 mesh. Same problem. Just my experience tho.

The tension is way too low to get a good print, not recommended for any serious work.

These screens are advertised as high tension, but that is not the case at all. They are some of the lowest tension screens I've ever used, and I'm always out of registration when I use them, there's no way to print more than one pass using these screens. You're much better off spending more on nice frames, because the money you'll spend on ruined t-shirts will quickly add up when you use these cheap frames.

Cadre ridiculement petit, autant prendre directement plus grand.

I won't order these again. These couldn't be much worse. There is no way I'm putting these screens in the exposure unit. The corners and edges are all quite sharp, just asking to put a hole in the neoprene of the vacuum system. The edges are held down with foil tape? And a while roll of foil tape in the hox, what's that for. I think they are crappy, I guess I'm used to quality equipment.