Kundeanmeldelser for VEVOR Dreneringssett for innkjørsel, plastrist - 5,8

Need to be in a neutral to cool climate would not suggest using them in Arizona Texas areas where it exceeds hundreds of degrees daily after day because they are wide and they will melt

The drain itself is perfect for what was needed. The issue with it is that none of the side or end pipe rings will fit a drainage pipe or any of the drainage fittings. Had to silicone the 3-inch elbow onto the end connection point in order to get the drainpipe to work for carrying the water away.

I wish I had read the negative reviews before buying. There are a few problems with the design of this: 1) The pipe connections are metric. Good luck finding something that will fit. I had to glue a connector to a corrugated pipe 2) They do not connect to each other easily. When you put them end against end one always flexes. One has to hammer them together so there is less of a gap between units 3) The worst part, the length of the grate is wrong. If you put both end caps, the grates do not fit. I had to cut one grate in order to make it fit. All in all I wish I had gotten something else. The material seems to be good, I will have to see in time

As the saying goes you get what you paid for. I'm not overly disappointed with the purchased but I think there's room for improvement in the quality department. The channel drain itself is well designed but it could stand to be a little bit more sturdier. The connections between the sections also could be a little bit more secure. I ended up having to put metal corner brackets between the sections because they kept on disconnecting and I also used silicone to waterproof the seams. Other reviews you may have read about the size of the outlet to connect PVC or corrugated drain pipe are accurate. I found no elbows for couplings that will snuggly fit the outlet on the bottom of this drain. I modified it to work with other fittings but it's not ideal.

There is no way to adapt these grates to an existing or new drain pipe. Great product but the current cut outs on the bottom of the grate doesn’t fit any existing drain sold in big box stores. So I made my own with my 3D cutter. Vevor should offer this or I can ship them out to the 85% of the customers that will need one. LOL Slides into the channel nicely and I made it thicker so it fits better than the existing stock option.

The trench system appeared to be good quality. The problem was the sizing, they need to have a narrow size available. It is a pretty large trench grating at 5 1/2 inches wide. I was looking for more around 3 -4, so I did not use.

INACCURATE TRACKING INFORMATION- WAS DELIVERED AND NO ACTIONS FOR OVER 24 HRS

Initially, these seemed like very good units and were priced competitively. But after using them and going through a wet season, I found they have a serious design flaw that limits their effectiveness. The slots are quite far apart…much further than others I have on my property. As a result, a considerable amount of water simply by-passes the slots and never enter the drain. This limits the effectiveness of the drains significantly. If the amount of water is “casual” this may not be an issue, but for the intended usage I had it compromises their use. I have had new grates made that work well and as would be expected. I would not buy these in the future as a result of this flaw….others I looked at have the slots much closer together.

We just opened it up and 4 of the grates are broken. We should have opened it up sooner, but still disappointing.

There is no way to lock a drain, end cap, or extension to these! I had to get creative with self tapping screws and silicone. Will get the job done though